SMARTCOAT™ 600 Acrylic Traffic Coat is a unique, water-based coating designed to protect walking areas and paths on smooth roofing systems. SMARTCOAT 600 can be used on coated and liquid-applied roof systems, as well as approved single ply1, metal, modified bitumen and BUR roofing. It is formulated with extremely tough acrylic resins and binders to form a long lasting walking surface on smooth and coated roofs. SMARTCOAT 600 contains an aggregate to form a textured non-slip surface with very high abrasion resistance. When applied properly it will protect the roof surface from damage due to foot traffic. It will also provide a non-slip surface adding an extra level of safety for personnel walking on the roof surface. This product can be reinforced with polyester fabric to provide an even greater level of protection from puncture and equipment damage in areas of high abuse. SMARTCOAT 600 allows the normal flow of water on the roof surface. It does not block or dam water like roof protection pads and sheets. 

1Consult CertainTeed for recommended membrane

Información técnica


Safety Yellow, Gray

Dry Time

24 hours light foot traffic, minimum 72 hours heavy traffic




61 lb




10.5 lbs./G

Solids by Volume

52 %


Cobertura: 2 gallons per 100 square feet, per coat. Recommended 4 gallons minimum in two coat application.

1. Clean roof surface thoroughly with SMARTCOAT 100 Roof Wash.  Surface must be free of any contamination that may inhibit adhesion.  Allow surface to completely dry before coating.

2. Mechanically mix. Apply only at temperatures between 50ºF and 110ºF and no threat of rain for 48-72 hours.

3. Using short nap or smooth roller, apply at stated coverage rate.  In high abuse areas, embed SMARTCOAT 501 polyester fabric into application while wet. Allow first coat to dry a minimum 24 hours. 

4. Apply a second coat at stated coverage rate. It is recommended to apply at a right angle to the first coat. Allow product to dry for 24 hours for light foot traffic, and at least 72 hours for heavy foot traffic.

5. Clean tools with mineral spirits or paint thinner if coating has dried. If coating is still wet, clean up with warm soapy water.


For more information, see published SMARTCOAT specifications at

Para detalles y especificaciones de construcción Haga clic aquí

Detalles de la garantía

CertainTeed ofrece tres opciones de garantía del sistema de techo asfáltico de pendiente baja: Garantía limitada de materiales, garantía limitada de Integrity Roof System y garantía limitada de Integrity Roof System NDL (sin límite de dólares). Las duraciones de las garantías de CertainTeed se basan en una combinación de especificaciones del sistema y selección de productos. Descargue una descripción general de estas opciones de garantía para obtener más detalles. Consulte con su contratista o con el gerente territorial de CertainTeed para determinar qué garantía es mejor para su proyecto.     

CertainTeed ofrece duraciones de garantía para el sistema de techo asfáltico de pendiente baja estándar de entre diez y veinticinco años. Además, los contratistas Gold Star pueden aumentar las duraciones de las garantías en un 25% si celebran un Acuerdo de mantenimiento de la integridad con su cliente.

Distribuidores de techos comerciales

Ver todos los distribuidores cerca de usted
Para empezar
Powered by GlobalLink OneLink SoftwarePowered By OneLink